Products · Condition monitoringVibration diagnosisFAG Detector IIIDetector III is based on the successful Detector II. The proven, simple operating concept was retained and supplemented by a large number of new functionalities. In addition to vibration measurement, contact-free temperature measurement and data collection, the system is now also capable of carrying out static and dynamic balancing tasks. As a result, imbalance can not only be detected but easily and efficiently eliminated. For this purpose, the optionally available Balancing Kit is required. With the aid of the software installed on the system, the user is guided through the balancing procedure step by step. The results of the balancing procedure as well as the vibration measurement are transferred to the software FAG Trend line where they are analyzed and evaluated. The completely revised F’IS Viewer offers the user a large number of auxiliary functions that make data analysis considerably easier. In particular, the newly integrated bearing database containing approx. 20 000 bearings from various manufacturers gives simpler and more efficient analysis of the measured data. As a result, it is very easy to compare the measured data with possible damage frequencies. A completely new feature is the optional functionality of automatic detection of measurement points. RFID tags are applied at the measurement points and are thus detected automatically by the system. This contributes not only to prevention of errors but also to optimization of measurement time. Further highlights of the system: an expanded memory capacity, allowing storage of up to 1600 measurement points in parallel with up to 270 time signals, the speed measurement function and the revised report generator system. Ordering designation:
DETECT3-KITIncluded in delivery: • Basic device with rechargeable battery • Acceleration sensor with magnetic foot
• Temperature sensor
• Charger
• PC data cable (serial/USB)
• User manual
• Protective bag with holder for temperature sensor
• PC software Trend line
• Case
Ordering designation:
DETECT3-KIT-RFID
Included in delivery:
• As DTECT3-KIT
• RFID reader (integrated)
• RFID
Products · Condition monitoringVibration diagnosis
Vibration diagnosis is the most reliable method for identifying machine damage at an early stage. Imbalance and misalignment defects can be detected accurately, as well as rolling bearing damage and gear tooth defects. For this area, we therefore offer a comprehensive product portfolio, ranging from simple vibration
Monitors to complex monitoring systems with a large number of measurement points FAG vibration measuring devices help to plan maintenance work, extend bearing life, reduce costs and increase plant availability. In the field of offline monitoring devices, we offer Detector II and Detector III. The online monitoring devices include products from the economical Easy Check range, the digital vibration monitors DTECT X1 and WiPro as well as the online monitoring systems VibroCheck and ProCheck. For all these devices and on all aspects of condition monitoring, F’IS offers a worldwide service – from the F’IS Customer Hotline to customer-specific service contracts. In order to achieve optimum networking, all online systems have versatile communication options as standard.
FAG Detector II
Detector II is a portable vibration measuring device and data collector in one. Using this economical device is straightforward and easy to learn. It weighs approx. 450 g and is highly suitable for monitoring extensive plant where measurement rounds involving large distances must be covered. Detector II picks up vibration signals at predetermined measurement points and calculates the effective values for vibration rate and acceleration. It can be used to monitor machine vibrations in accordance with ISO 10816 as well as the rolling bearing condition using the demodulated signal detection method. Temperatures can also be measured by non-contact means using an infrared sensor. The data collected by the device are transferred to a computer. They are then evaluated, analyzed and presented in diagrammatic form with the aid of the software Trendline. Any incipient damage can thus be detected at an early stage. Detector II can also be used by personnel who have no experience of vibration measurement. A very useful feature in this respect is the “e-mail button”. This allows the collected data to be sent to an
DETECT3-KITIncluded in delivery: • Basic device with rechargeable battery • Acceleration sensor with magnetic foot
• Temperature sensor
• Charger
• PC data cable (serial/USB)
• User manual
• Protective bag with holder for temperature sensor
• PC software Trend line
• Case
Ordering designation:
DETECT3-KIT-RFID
Included in delivery:
• As DTECT3-KIT
• RFID reader (integrated)
• RFID
Products · Condition monitoringVibration diagnosis
Vibration diagnosis is the most reliable method for identifying machine damage at an early stage. Imbalance and misalignment defects can be detected accurately, as well as rolling bearing damage and gear tooth defects. For this area, we therefore offer a comprehensive product portfolio, ranging from simple vibration
Monitors to complex monitoring systems with a large number of measurement points FAG vibration measuring devices help to plan maintenance work, extend bearing life, reduce costs and increase plant availability. In the field of offline monitoring devices, we offer Detector II and Detector III. The online monitoring devices include products from the economical Easy Check range, the digital vibration monitors DTECT X1 and WiPro as well as the online monitoring systems VibroCheck and ProCheck. For all these devices and on all aspects of condition monitoring, F’IS offers a worldwide service – from the F’IS Customer Hotline to customer-specific service contracts. In order to achieve optimum networking, all online systems have versatile communication options as standard.
FAG Detector II
Detector II is a portable vibration measuring device and data collector in one. Using this economical device is straightforward and easy to learn. It weighs approx. 450 g and is highly suitable for monitoring extensive plant where measurement rounds involving large distances must be covered. Detector II picks up vibration signals at predetermined measurement points and calculates the effective values for vibration rate and acceleration. It can be used to monitor machine vibrations in accordance with ISO 10816 as well as the rolling bearing condition using the demodulated signal detection method. Temperatures can also be measured by non-contact means using an infrared sensor. The data collected by the device are transferred to a computer. They are then evaluated, analyzed and presented in diagrammatic form with the aid of the software Trendline. Any incipient damage can thus be detected at an early stage. Detector II can also be used by personnel who have no experience of vibration measurement. A very useful feature in this respect is the “e-mail button”. This allows the collected data to be sent to an